How To Use A Gas Starter Wood Burning Fireplace

How To Use A Gas Starter Wood Burning Fireplace

How To Use A Gas Starter Wood Burning Fireplace. The biggest benefit to a gas starter is you will have less creosote and a healthier start to your fire. A gas line can be installed in this fireplace style, which allows you to connect a log lighter to the hard pipe gas line that enters your firebox.

How To Use A Gas Starter Wood Burning FireplaceHow To Use A Gas Starter Wood Burning Fireplace
How to replace gas fireplace starter, gas fire starter for from s3.amazonaws.com

Do not use solid fuels if they are labeled for gas appliances only. The biggest benefit to a gas starter is you will have less creosote and a healthier start to your fire. Once the burner is lit, insert the key and turn it.

Light The Fire Using Long Matches By Lighting The Fire Starter In As Many Locations As Possible Across The Fireplace.

You have to remove the gas logs and its gas burner pipe entirely and replace it with a real gas starter pipe that you can purchase from a stove shop or a hardware store. What you have is a masonry fireplace with a set of gas logs stuck in them. The biggest benefit to a gas starter is you will have less creosote and a healthier start to your fire.

Do Not Use Solid Fuels If They Are Labeled For Gas Appliances Only.

Don't wait after you turn on the gas. Place kindling below the logs. Gas starter fireplaces differ from gas fireplaces because in a gas starter.

A Gas Line Can Be Installed In This Fireplace Style, Which Allows You To Connect A Log Lighter To The Hard Pipe Gas Line That Enters Your Firebox.

Use only an appropriate type of fuel for your fireplace or stove as described in the owner’s manual or on its label. Light the gas starter using your match or lighter immediately. To keep a fire going, add a couple of larger sized logs to the fire once the initial bits of wood have burnt through.

Use Hardwood Logs For Longer And Hotter Burning.

You can then utilize your starter pipe to ignite your logs. Just set the logs on the wood grate over the log lighter, turn the key to open the gas line, toss in a lit match, and the fire lights around your logs. Then you can use the key to control the intensity of the flames.

Stack Your Wood On A Grate Just Like You Would Normally.

Once a wood fire has got going a gas starter can be turned off and gas therefore isn’t the primary source of fuel for a gas starter fireplace. Light your long match or have your long lighter in your hand and ready to go. After the logs have caught on fire, turn the valve key to close the gas line, and enjoy the crackling wood fire before you.

Posted in DIY

Tags - BurningFireplace